Monday, August 29, 2016

Creating a MariaDB MaxScale router module

I wanted to do some tests with MariaDB MaxScale and realized that the two existing routers (beyond the binlog router that is, which is a bit special) didn't do what I wanted them to do. What I was looking for was a simple round-robin feature and none of readconnroute nor readwritesplit could be configured to do this, they are just too smart for my simple experiment.

Why would you want a round-robin router then? Well, one use case is when you are INSERTing a lot of data and you just want to persist it. You don't have the use case where you have to SELECT data from all servers, but in the case you need it, you just select from all servers until you find what you need. Let's think about log data that you don't care much about but that  you for some reason need to retain, maybe for corporate policy reasons or legal reasons. Using round-robin could, in theory, give you better performance, but that would require something way smarter than what I am proposing here. Rather, you get INSERT availability, i.e. you will always have some server to insert into and secondly, you get INSERT sharding, which is basic but useful, you only store so much data on each server.

So, let's get to work. To begin with you need the MaxScale source tree, place yourself in some directory where you want this and do this:
$ git clone https://github.com/mariadb-corporation/MaxScale.git
Now you should have a directory called MaxScale, so pop in there are, create a build directory and then run cmake to configure MaxScale itself:
$ cd MaxScale
$ mkdir build
$ cd build
$ cmake ..
$ make
These are the quick instructions and you will probably find that you lack some dependencies. The full instructions for how to do this is available as part of the sample code as presented later in this document, and that is available from Sourceforge. Browse to https://sourceforge.net/projects/mxsroundrobin/files and then click on roundrobin 1.0 where you find a pdf with detailed instructions. Also there is a tgz there will all the sourcecode presented late in this blog.

So, now we have something to work with and the plan is to introduce a new router module in this tree. To begin with pop over to where routers module code is and create a directory for our code there:
$ cd ../server/modules/routing
$ mkdir roundrobin
$ cd roundrobin
Before we can start building some code, let's look at the basics of what kind of code gets into a module.

A plugin is a shared object that is loaded by MaxScale core when it starts. Early on when MaxSCale starts it reads the configuration file, /etc/maxscale.cnf by default, and in there each service defines a router. Note that several services can use the same router so our code we write later has to take this into account. Look at this extract of a service section for example:
[Read-Write Service]
type=service
router=readwritesplit
The router here tells MaxScale to look for a readwritesplit module, or in technical terms, it will load the shared library: libreadwritesplit.so. After loading this library successfully, MaxScale has to figure out a few things about this module, like it's name and version and above all, the entry points for the functions that MaxScale will call when processing a connection. In addition we need to define a few structs that are passed around these different calls to give the different router functions some context. Lets start with a header file rooundrobin.h in the roundrobin directory:
#ifndef ROUNDROBIN_H
#define ROUNDROBIN_H
#include <server.h>

typedef struct tagROUNDROBININST *PROUNDROBININST;

typedef struct tagROUNDROBIN_CLIENT_SES {
  SPINLOCK lock;
  bool bClosed;
  SERVER **pBackends;
  SESSION *pSession;
  DCB **pdcbClients;
  unsigned int nBackends;
  unsigned int nCurrBackend;
  PROUNDROBININST pRouter;
  struct tagROUNDROBIN_CLIENT_SES *pNext;
} ROUNDROBIN_CLIENT_SES, *PROUNDROBIN_CLIENT_SES;

typedef struct tagROUNDROBININST {
  SERVICE *pService;
  PROUNDROBIN_CLIENT_SES pConnections;
  SPINLOCK lock;
  SERVER **pBackends;
  unsigned int nBackends;
  struct tagROUNDROBININST *pNext;
} ROUNDROBININST;
#endif
As you can see, the main thing here is that I define and typedef two structs. As I said, I have mostly been looking at other existing routers and grabbed the stuff in there, so I can't explain all aspects of these structs, but let's look at a few members:
  • These structs are in a linked list and the pNext member is a pointer to the next element in this list.
  • The lock members is a reference to a spinlock associated with the struct.
  • The pBackends member is a pointer to an array of pointers to the database SERVERS that this service is attached to.
  • The pbcdClients member is an array of pointers to DCDs. A DCB is the Descriptor Control Block which is a generic descriptor of a connection inside MaxScale, be it a server or a client. In this case this is the DCBs to the SERVERs in pBackends.
  • The nBackends is the number of elements in the pBackends and pdcbClients arrays.
  • The pRouter member is a pointer to the ROUNDROBININST for the connection.
That is the most of that, the next step now is to start with the more exiting stuff of the actual code take make up this module. The main source file we work with here is roundrobin.c and we need a few basics in this. Let's have a look the beginning of roundrobin.c:
#include <my_config.h>
#include <router.h>
#include <query_classifier.h>
#include <mysql_client_server_protocol.h=>
#include "roundrobin.h"

/* Macros. */
#define ROUNDROBIN_VERSION "1.0.0"

/* Globals. */
MODULE_INFO info = {
  MODULE_API_ROUTER,
  MODULE_GA,
  ROUTER_VERSION,
  "A simple roundrobin router"
};
static PROUNDROBININST pInstances;

/* Function prototypes for API. */
static ROUTER *CreateInstance(SERVICE *service, char **options);
static void *CreateSession(ROUTER *pInstance, SESSION *session);
static void CloseSession(ROUTER *pInstance, void *session);
static void FreeSession(ROUTER *pInstance, void *session);
static int RouteQuery(ROUTER *pInstance, void *session, GWBUF *queue);
static void Diagnostic(ROUTER *pInstance, DCB *dcb);
static void ClientReply(ROUTER *pInstance, void *router_session,
  GWBUF *queue, DCB *backend_dcb);
static void HandleError(ROUTER *pInstance, void *router_session,
  GWBUF *errmsgbuf, DCB *backend_dcb, error_action_t action,
  bool *succp);
static int GetCapabilities();

static ROUTER_OBJECT RoundRobinRouter = {
  CreateInstance,
  CreateSession,
  CloseSession,
  FreeSession,
  RouteQuery,
  Diagnostic,
  ClientReply,
  HandleError,
  GetCapabilities
};
Let's now look at what is going on here. To begin with I include a few necessary files, including roundrobin.h that we created above and then a macro is defined. Then the MODULE_INFO struct follows. The information in this is used by MaxScale to get information on the router, but if you leave this out, currently MaxScale will start anyway. The command show modules in maxadmin will return the information in this struct for the module.


Then follows a number of function prototypes, and these are needed here before the ROUTER_OBJECT struct, and this is the key to the router as it provides the entry points for MariaDB itself. Again, I will not specify exactly what all of these do, I have mostly just grabbed code from other routers.

Following this we need some basic functions that all routers implement, to initialize the module, get the version and a function to return the ROUTER OBJECT defined above:
/*
 * Function: ModuleInit()
 * Initialize the Round Robin router module.
 */
void ModuleInit()
   {
   MXS_NOTICE("Initialise roundrobin router module version " ROUNDROBIN_VERSION ".");
   pInstances = NULL;
   } /* End of ModuleInit(). */


/*
 * Function: version()
 * Get the version of the roundrobin router
 */
char *version()
   {
   return ROUNDROBIN_VERSION;
   } /* End if version(). */


/*
 * Function: GetModuleObject()
 * Get the object that describes this module.
 */
ROUTER_OBJECT *GetModuleObject()
   {
   return &RoundRobinRouter;
   } /* End of GetModuleObject(). */
With that we have completed the housekeeping code and are ready to look at the functions that implement the actual functionality. We'll look at CreateInstance first which, as the name implies, creates an snstance of RoundRobin. Note that within a running MaxScale there might well be more than one instance, one for each RoundRobin service.
/*
 * Function: CreateInstance()
 * Create an instance of RoundRobing router.
 */
ROUTER *CreateInstance(SERVICE *pService, char **pOpts)
   {
   PROUNDROBININST pRet;
   PROUNDROBININST pTmp;
   SERVER_REF *pSvcRef;
   unsigned int i;

   MXS_NOTICE("Creating roundrobin router instance.");
/* Allocate the RoundRobin instance struct. */
   if((pRet = malloc(sizeof(ROUNDROBININST))) == NULL)
      return NULL;
   pRet->pService = pService;
   pRet->pConnections = NULL;
   pRet->pNext = NULL;
   pRet->nBackends = 0;

/* Count the number of backend servers we manage. */
   for(pSvcRef = pService->dbref; pSvcRef != NULL; pSvcRef = pSvcRef->next)
      pRet->nBackends++;

/* Allocate space for the backend servers and add to the instance struct. */
   if((pRet->pBackends = calloc(pRet->nBackends, sizeof(SERVER *))) == NULL)
      {
      free(pRet);
      return NULL;
      }

   spinlock_init(&pRet->lock);

/* Set up list of servers. */
   for(i = 0, pSvcRef = pService->dbref; pSvcRef != NULL; i++, pSvcRef = pSvcRef->next)
      pRet->pBackends[i] = pSvcRef->server;

/* Set up instance in list. */
   if(pInstances == NULL)
      pInstances = pRet;
   else
      {
      for(pTmp = pInstances; pTmp->pNext != NULL; pTmp = pTmp->pNext)
         ;
      pTmp->pNext = pRet;
      }

   MXS_NOTICE("Created roundrobin router instance.");
   return (ROUTER *) pRet;
   } /* End of CreateInstance(). */
Again, nothing really exiting is happening, I create a struct that defines the instance, initialize it and add it to the linked list of instances that I maintain. Also I get references to the backend servers that this instance use and set up the array for the and I also initialize the spinlock. With that, we are done. Then there is the issue of creating a session, and this function gets called when a client connects to MaxScale through the port that is linked to RoundRobin.
/*
 * Function: CreateSession()
 * Create a session in the RoundRobin router.
 */
void *CreateSession(ROUTER *pInstance, SESSION *session)
   {
   PROUNDROBIN_CLIENT_SES pRet;
   PROUNDROBIN_CLIENT_SES pTmp;
   PROUNDROBININST pRoundRobinInst = (PROUNDROBININST) pInstance;
   unsigned int i;

/* Allocating session struct. */
   if((pRet = malloc(sizeof(ROUNDROBIN_CLIENT_SES))) == NULL)
      return NULL;
   spinlock_init(&pRet->lock);
   pRet->pNext = NULL;
   pRet->nCurrBackend = 0;
   pRet->pSession = session;
   pRet->pRouter = pRoundRobinInst;
   pRet->nBackends = pRoundRobinInst->nBackends;

/* Allocating backends and DCBs. */
   if((pRet->pBackends = calloc(pRet->nBackends, sizeof(SERVER *))) == NULL)
      {
      free(pRet);
      return NULL;
      }
   if((pRet->pdcbClients = calloc(pRet->nBackends, sizeof(DCB *))) == NULL)
      {
      free(pRet->pBackends);
      free(pRet);
      return NULL;
      }

/* Set servers and DCBs. */
   for(i = 0; i < pRet->nBackends; i++)
      {
      pRet->pBackends[i] = pRoundRobinInst->pBackends[i];
      pRet->pdcbClients[i] = NULL;
      }

/* Place connecting last in list of connections in instance. */
   spinlock_acquire(&pRoundRobinInst->lock);
   if(pRoundRobinInst->pConnections == NULL)
      pRoundRobinInst->pConnections = pRet;
   else
      {
      for(pTmp = pRoundRobinInst->pConnections; pTmp->pNext != NULL; pTmp = pTmp->pNext)
         ;
      pTmp->pNext = pRet;
      }
   spinlock_release(&pRoundRobinInst->lock);

   return (void *) pRet;
   } /* End of CreateSession(). */
This is also pretty basic stuff, the server pointers are copied from the instance (do I need to do this you ask? Answer is, I don't know but I do know that what I do here works). I also clear the DCB pointers, these are created on an as-needed base later in the code.

Following this are a couple of basic housekeeping functions that I am not showing here, actually I'm just going to show one more function, which is RouteQuery. This is, as the name implies, the function that gets called to do what we are actually writing this code for, routing queries. Before I show that code, I have to explain that this is very simplistic code. To being with, it doesn't implement "session commands", these are commands that really should be run on all backends, like setting the current database, handling transactions and such things. As I said, I do not implement this and this is one of the major shortcomings on this code that makes it much less generally applicable. But it still has use cases. Secondly, I have tried to make sure that the code works, more than optimizing it to death, so maybe I grab the spinlock too often and maybe I am too picky with allocating/deallocating the DCBs, I let others answer that.

The role of the function at hand is to handle an incoming query and pass it along to one of the servers defined for the service in question. In the general case, the most complicated part of this is selection of which server to route the query to and handling of session commands. I have simplified this by only having a very simple routing algorithm where I store the index of the last used backed for a connection in the nCurrBackend member, and for each query this is incremented until nBackends is reached where it is reset to 0. And for the complexity of session commands, I just don't implement them.

So, lets have a look at what the RouteQuery function looks like:
/*
 * Function: RouteQuery()
 * Route a query in the RoundRobin router.
 */
int RouteQuery(ROUTER *instance, void *session, GWBUF *queue)
   {
   PROUNDROBIN_CLIENT_SES pSession = (PROUNDROBIN_CLIENT_SES) session;
   DCB *pDcb;
   int nRet;
   unsigned int nBackend;

   MXS_NOTICE("Enter RoundRobin RouteQuery.");
   queue = gwbuf_make_contiguous(queue);

   spinlock_acquire(&pSession->lock);
/* Check for the next running backend. Set non-running backend DCBs to NULL. */
   for(nBackend = pSession->nCurrBackend; nBackend < pSession->nBackends; nBackend++)
      {
/* If this server is up, then exit this loop now. */
      if(!SERVER_IS_DOWN(pSession->pBackends[nBackend]))
         break;

/* If the server is down and the DCB is non-null, then free the DCB and NULL it now. */
      if(pSession->pdcbClients[nBackend] != NULL)
         {
         dcb_close(pSession->pdcbClients[nBackend]);
         pSession->pdcbClients[nBackend] = NULL;
         }
      }
/* If I couldn't find a backend after the current, then look through the ones before. */
   if(nBackend >= pSession->nBackends)
      {
      for(nBackend = 0; nBackend <= pSession->nCurrBackend; nBackend++)
         {
         if(!SERVER_IS_DOWN(pSession->pBackends[nBackend]))
            break;
         if(pSession->pdcbClients[nBackend] != NULL)
            {
            dcb_close(pSession->pdcbClients[nBackend]);
            pSession->pdcbClients[nBackend] = NULL;
            }
         }

/* Check that I really found a suitable backend. */
      if(nBackend > pSession->nCurrBackend)
         {
         spinlock_release(&pSession->lock);
         MXS_NOTICE("No suitable RoundRobin running server found in RouteQuery.");
         return 0;
         }
      }

   pDcb = pSession->pdcbClients[nBackend];
/* If backend DCB wasn't set, then do that now. */
   if(pDcb == NULL)
      pDcb = pSession->pdcbClients[nBackend] = dcb_connect(pSession->pBackends[nBackend],
        pSession->pSession,
        pSession->pBackends[nBackend]->protocol);
   spinlock_release(&pSession->lock);

/* Route the query. */
   nRet = pDcb->func.write(pDcb, queue);

/* Move to next dcb. */
   pSession->nCurrBackend = nBackend;
   if(++pSession->nCurrBackend >= pSession->nBackends)
      pSession->nCurrBackend = 0;

   MXS_NOTICE("Exit RoundRobin RouteQuery.");
   return 1;
   } /* End of RouteQuery(). */
So, what is going on here? First I check for a backend, first the ones starting with the current one (which is badly named, this is actually the one after the current) and then until I find a server that is running. If I find a non-Running server I skip that one, after having closed the associated DCB. If I can't find a server after the current one, I start again from the first, processing servers in the same way.

Following this I should have a server, then I check if the DCB is open, and if not I open it now. After that I do the actual routing of the query, move not the next backend and then return. Simple as that. As I have stated, this is a very simple router, but it does work, within the given limitations, and it should be good enough as a crude example.

Before I can test my code, I have to set it up for inclusion in the build process and do a few other mundane tasks, but that is all documented in the pdf that comes with the code, download the package from Sourceforge.

Happy SQLing
/Karlsson

Wednesday, August 10, 2016

Installing MariaDB MaxScale the hard way

If you are like me (let's for everyones sake hope you are not, though) you like to do things the hard way, in particular when it comes to testing things. For example when installing things on your Linux box, just to try them out, you might not want to do a yum install an rpm -ivh or an apt-get to have some files spread all over your system, instead you want to tar xvf some tarball and possibly, if you are in a good mood or you want to be a nice so you get some gifts for christmas or maybe because it is just that day, you unpack that tarball in /usr/local instead of in /home/bofh/junk. And this will usually get you in some trouble, but as we have already determined that we are truly bad (maybe we should get a tattoo or two also, or is the right to death-metal antics reserved for IT security personel only? Sure seems so) we can ignore that and get to work.

Here I will show you how to install MariaDB MaxScale from a tar-ball and get it running, without touching any system directories or anything if you want to test it or if you, even in production, want to install it in some non-standard location (like /usr/local. I actually like to have stuff there, I don't know what's so wrong with that. I'm a rebel, I know).

To begin with, let's download MariaDB MaxScale tarball (rpm's are for wussies), for example from mariadb.com where you should register and then go to "my portal"->"Downloads"->"MariaDB MaxScale" and download an appropriate .tar.gz for your operating system of choice. In my case I download it for CentOS 6 / RHEL 6 and as the current MariaDB MaxScale version is 1.4.3 I issue the command in my home directory (/home2/anders):
$ wget https://downloads.mariadb.com/enterprise/<my tag>/mariadb-maxscale/1.4.3/rhel/6/x86_64/maxscale-1.4.3-1.rhel.6.x86_64.tar.gz
With <my tag> replaced by a generated tag on mariadb.com. Following this we are stuck with a tarball named maxscale-1.4.3-1.rhel.6.x86_64.tar.gz and we unpack that as usual and then create a more readable link to the created directory:
$ tar xvfz maxscale-1.4.3-1.rhel.6.x86_64.tar.gz
$ ln -s maxscale-1.4.3-1.rhel.6.x86_64 maxscale143
So far nothing magic has happened. The next step is to create a few directories in our new maxscale143 directory where MariaDB MaxScale will keep temporary, stuff, logs etc:
$ cd maxscale143
$ mkdir cache data log

The next step after this is to create a MariaDB MaxScale configuration file. There is a template for this in the etc subdirectory so we just have to copy that:
$ cp etc/maxscale.cnf.template etc/maxscale.cnf
The supplied config file will start MariaDB MaxScale with just 1 server defined, and unless you have this server running on a non-standard port or on another machine than the one where MariaDB MaxScale itself is running, you can leave this configuration file alone, and if not you have to edit the [server1] section appropriately.

Another thing to look for is iptables / firewalld settings, but this you already know about I guess. You might want to turn them off (which is not recommended at all) or configure it appropriately. As per the default configuration with MariaDB MaxScale 1.4.3, ports 4006, 4008 and 6603 will be listened to, so you configure iptables / firewalld appropriately. And don't turn them of, do this the right way for once. I turned iptables off by the way, just to annoy you.

Now, MariaDB MaxScale will connect to the server we defined in the configuration file above, and we need to allow it to connect and execute a few commands. There are two users that MariaDB MaxScale can use, one to connect and get authentication data, like usernames and passwords, and another separate one to monitor the state of the server. In the supplied configuration template these two users use the same account, namely myuser using mypwd as the password, and this is what I use in the following where are set up the appropriate user and grant in the MariaDB server I am connecting to, and also note that I am assuming that MariaDB MaxScale and the MariaDB server on question run on the same node. So connect to MariaDB and issue the following commands:
MariaDB> CREATE USER 'myuser'@'localhost'  IDENTIFIED BY 'mypwd';
MariaDB> GRANT SELECT ON mysql.user TO 'myuser'@'localhost';
MariaDB> GRANT SELECT ON mysql.db TO 'myuser'@'localhost';
MariaDB> GRANT SELECT ON mysql.tables_priv TO 'myuser'@'localhost';
MariaDB> GRANT SHOW DATABASES ON *.*TO 'myuser'@'localhost';
MariaDB> GRANT REPLICATION SLAVE ON *.* TO 'myuser'@'localhost';
MariaDB> GRANT REPLICATION CLIENT ON *.* TO 'myuser'@'localhost';

With this in place we are ready to start MariaDB MaxScale, but this is an itsy bitsy more complex than you think. The issue is that the default locations for a lot of stuff that MariaDB MaxScale wants to use is somewhere in the global file system, and they are also not relative to some basedir as is conveniently the case with MariaDB server itself. to support this, instead of putting all this in the global section in the MariaDB MaxScale config file I'll instead put any necessary arguments to get MaxScale going on the command line, and for that I have created three scripts, 1 to set up the environment, one to start MariaDB MaxScale and one to stop it. Let's start with the environment one. This is places in the MariaDB MaxScale home directory (maxscale143) is called maxenv.sh and has the following contents:
#!/bin/bash
#
MAXSCALE_HOME=$(cd $(dirname $BASH_SOURCE) ; pwd)
PATH=$PATH:$MAXSCALE_HOME/usr/bin
export LD_LIBRARY_PATH=$MAXSCALE_HOME/usr/lib64/maxscale


The next file to create is the script to start MariaDB MaxScale, this is called startmax.sh, is again placed in the MariaDB MaxScale root directory and has this content:
#!/bin/bash
#
. `dirname $0`/maxenv.sh

$MAXSCALE_HOME/usr/bin/maxscale \
  --config=$MAXSCALE_HOME/etc/maxscale.cnf \
  --logdir=$MAXSCALE_HOME/log \
  --language=$MAXSCALE_HOME/var/lib/maxscale \
  --datadir=$MAXSCALE_HOME/data \
  --libdir=$MAXSCALE_HOME/usr/lib64/maxscale \
  --piddir=$MAXSCALE_HOME --syslog=no \
  --cachedir=$MAXSCALE_HOME/cache

As you can see this invokes maxenv.sh before going on to start MariaDB MaxScale. The only parameter that I really don't have to set here, but which I set anyway, again  just to be annoying to the world in general, is --syslog=no as we are only testing things here and logging to syslog is then not really appropriate (but it is the default).

All we need now is script to stop MariaDB MaxScale, and for this create a file called stopmax.sh in the MariaDB MaxScale home directory with this content:
#!/bin/bash
#
. `dirname $0`/maxenv.sh

if [ -e "$MAXSCALE_HOME/maxscale.pid" ]; then
   kill -term `cat $MAXSCALE_HOME/maxscale.pid`
fi


Following this, the one thing that remains to be done is to make the scripts we just created executable:
$ chmod +x maxenv.sh startmax.sh stopmax.sh

Now we are ready to try things, let's start MariaDB MaxScale first:
$ ./startmax.sh
And then let's see if we can connect to the MariaDB server through MariaDB MaxScale:
$ mysql -h 127.0.0.1 -P 4006 -u myuser -pmypwd
Welcome to the MariaDB monitor.  Commands end with ; or \g.
Your MySQL connection id is 6950
Server version: 10.0.0 1.4.3-maxscale MariaDB Server

Copyright (c) 2000, 2016, Oracle, MariaDB Corporation Ab and others.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

MySQL [(none)]>

As you can see, I am not connecting as root here, as this is not allowed by MariaDB MaxScale by default. Also, I am not connecting to localhost as that assumes I am connecting using a socket, which is not what we want to do here.

This is all for today, now I'll need to start my Harley-Davidson and head down town to hang with the other tough guys (OK, I'm really taking my beaten-up Ford and pick up the kids from Kindergarten, I admit it).

Keep on SQL'ing
/Karlsson

Monday, August 8, 2016

MyQuery 3.5.6 released

I released version 3.5.6 of MyQuery, and there are quite a number of new features and fixes in there. The #1 bugfix is that the annoying access warnings that poped up from Windows when saving to the registry are gone, as I have now moved the registry to a more Windows 10 acceptable place. Among the new features are:
  • JSON format output when saving results.
  • More flexible CSV format output with many new options.
  • Ability to save Dyncol as JSON in CSV and JSON output.
  • Nicer formatting of numbers in status dialogs.
  • Auto refresh of status dialogs
 As this is a version with many new features, I still consider this a Beta. I have built it on Windows 10 and tested it on Windows 10 and 7, 64-bit, although MyQuery itself is still a 32-bit windows application.

Happy SQL'ing
/Karlsson

Tuesday, February 16, 2016

Loading JSON into MariaDB or even MySQL - mysqljsonimport 2.0 is available

It was a long time since I updated mysqljsonimport or mysqljsonexport and I had a few things I wanted to do with them. This release is significant enough for me to bump it up to 2.0, and the same is in the works for mysqljsonexport. The one big thing that is now implemented is reasonably advanced support for MariaDB Dynamic Columns, and it is actually pretty flexible, allowing you to load a nested JSON object into a MariaDB Dynamic Column. But don't worry, it will still link and run with MySQL if that is what you want to do (but then you will not have the dynamic column features, for obvious reasons),

Download from Sourceforge as usual (yes, I know I am oldfashioned and that I should have put it on github). Also as usual is the documentation in pdf format that is also downloadable separately.

/Karlsson

Monday, December 14, 2015

Getting started with MariaDB on IBM POWER 8

IBM POWER 8 is latest generation of the IBM POWER series, and it's a hot one. Above all, for you reading this, POWER 8 is the most Linux friendly so far and IBM really wants you to try this out. Seveal Linux distributions are supporting POWER 8 now, and MariaDB is of course the database of choise. Some cools things with the POWER 8 architecture are the support for CAPI (google for more details) and the fact that POWER 8 machines, due to a vastly superior memory architecture, can grow in memory size, which in general is good news but if you want your own POWER 8, this makes then a bit expensive (although maybe not when you consider the performance you get). IBM has fixed that recently and have announced the LC series of servers which start at $6.600 (see more here: http://www-03.ibm.com/systems/power/hardware/linux-lc.html).

So, whar about MariaDB then? Well, MariaDB is a standard component in the Linux distributions that support IBM POWER 8, but we here at MariaDB didn't stop there. We have made numerous fixes to MariaDB to make it perfom at it's best and to increase stability even more. To get at those nice additions and enhancements though, you have to run with the latest MariaDB versions and use the binary builds we provide, and here I'll show you how to do that.

To begin with, you have to register with MariaDB.com, which is free if you want to try MariaDB Enterprise. So surf to MariaDB.com and you should get something like this:
On the top right, as indicated above, are "Login" and "Sign up" links. Select the last of these two and follow the procedure. Then you can revsit this page and log in, and the the links at the top right now say "Logout", "My Portal" and "Profile". Click on the "My Portal" link and you get to a page that looks like this:
Above is indicated the "Downloads" tab, click on this and you will be taken to a page with many different download sections. In this case, let's assume you are on Ubuntu, then select this:
Now it is time to do the actual installation, just follow the steps listed on the page, as I write this, this means I will run:
wget https://downloads.mariadb.com/enterprise/dnae-wefq/generate/10.0/mariadb-enterprise-repository.deb
 dpkg -i mariadb-enterprise-repository.deb
 sudo apt-get update
sudo apt-get install mariadb-server
Following all this. MariaDB is now up and running, but I see you asking yourself, what about POWER 8? How do I install MariaDB on that? And fact is, that is exactly what we have dne here. Or Intel x86 for that matter, the procedure is exactky the same, the differences are handles behind the scenes.

Happy power hacking, I will get back soon with a writeup on MaxScale on POWER 8
/Karlsson

Wednesday, August 26, 2015

MyOraDump, Oracle dump utility, version 1.2

I have now released version 1.2 of MyOraDump, my Oracle data extraction tool. This version has one new feature, which is transaction support for MySQL format exports which does speed up loading data a lot! Trust me, it really does! Also I have fixed a bug that did cause a crash at the end of the run, I have no idea why this didn't show up before, but there you go and now it is fixed.

MyOraDump 1.2 can be downloaded sourceforge, and as usual there is also a pdf only download if you want to read up on the tool before using it.

/Karlsson

Friday, August 7, 2015

Oracle dump utility version 1.1

Today I released version 1.1 of myoradump for download from sourceforge. If you don't know what myoradump is, this is a utility for exporting data from an Oracle database in some relevant text format so that it can be imported to some other database.

The main thing in version 1.1 is that I have added a whole bunch of new output formats, so make it even easier to get your data out of expensive Oracle and into something more effective. The new formats supported are:
  • MySQL - The format of this is a bunch of INSERT statements that you get when you use mysqldump for example and is useful for import into MariaDB (and MySQL). INSERT arrays are supported as a bunch of more options.
  • JSON - This format is rather obvious, the output is a file consisting of one JSON object per row. To support binary data, which is a no-no in JSON, base64 encoding of binary data is also supported.
  • JSON Array - The format is similar to JSON, but instead of separate objects per row, this format consists of one or more JSON arrays of JSON objects.
  • HTML - This format will produce a valid HTML TABLE. This is sometimes useful when you want to view output data that includes UTF8 characters for example.
In additions, this version of  myoradump includes a bunch of new features and bug fixes. I will follow up this post with one that includes some specific examples of using myoradump eventually.

So, don't touch that dial!
/Karlsson